Beam RemoteSAT - RST100

RemoteSAT has been designed to be used in fixed site, maritime and emergency service applications where permanently installed reliable communications services are required. The RemoteSAT device enables a Beam TrackALERT RST030 alert tracking interface to be connected directly to the terminal and there is also a purpose built back-up battery available that can provide up to 24 hours standby time for mission critical applications.

The terminal is capable of presenting dial, busy and ring tones to suit country-specific requirements as well as auto-dial or restricted dial functionality. The terminal also supports access to the complete range of data services provided by Iridium including Short Burst Data, Circuit Switched Data and Direct Internet as well as SMS.

The RST100 - Remote Satellite Terminal:

  • Provides a reliable and cost-effective telephone or data service connection when a wired connection is not available, via the Iridium network—a satellite-based, wireless communications network.
  • Allows the connection of standard telephone handsets and other telecommunications devices.
  • Emulates the functionality of the Public Switched Telephone Network (PSTN).
  • Includes two wire voice connections and a Hayes compatible modem, providing a serial socket for a computer, a socket for the connection of a plug-pack type mains power supply and a connection to an external antenna.
  • Provides a serial control interface and audio input and outputs by way of the transceiver’s control and connection interface.

How it Works

RemoteSAT has been designed to be used in fixed site, maritime and emergency service applications where permanently installed reliable communications services are required. The RemoteSAT device enables a Beam TrackALERT RST030 alert tracking interface to be connected directly to the terminal and there is also a purpose built back-up battery available that can provide up to 24 hours standby time for mission critical applications.

Sea

  • Crew calling
  • Captain and crew calling from one unit
  • Connect to ship’s PBX
  • Reduced cost shore to ship communications
  • Installed as part of an SSAS system
  • Installed as part of a tracking system

Land:

  • Connection to PBX system
  • Inbuilt satellite communications
  • Emergency back-up
  • Remote work site
  • Roadhouse
  • Interim Phone Service
  • Transport application where cordless handset required

Air:

  • Aircraft in which cordless or standard telephone handsets are required for specific installations

Tech Specs & Features

Terminal Features:
  • Supports standard phone equipment
  • Connect to PABX
  • Compact intelligent handset
  • Uses intelligent handset
  • SMS/SMSMO from terminal
  • Supports SMS over POTS
  • SSAS compatible
  • Tracking and monitoring capable
  • Intelligent processor and interface
  • Phone number processing
  • Line reversal for payphone use
  • Auto-dial and speed dial options
  • Secure SIM card enclosure
  • Local and remote configuration
  • External ringer available
  • Supports back-up battery
  • Incorporates call logging
  • Fully certified against corrosion/vibration
  • Easy to install


Power Specifications
Power input voltage   11 – 32 VDC
Power Consumption (AMPS)   12 V DC   24 VDC
Stand-by   0.35   0.16
Transmit   0.51   0.25
Stand-by – incl handset   0.47   0.22
Transmit – incl handset   0.59   0.29

Environmental Specifications
Temperature   Degrees °C   Degrees °F
Operating Range   –15 to +55   +5 to +131
Storage   –30 to +70   –22 to +158
Humidity   93% non condensing
Vibration   2 Hz – 13.2 Hz and 13.2 Hz – 100 Hz
Corrosion   40 °C with 90% – 95% relative humidity after 2h salt spray

Connectors/Interfaces
  • Intelligent handset
  • RJ45 DPL BUS
  • Telephone/POTS
  • RJ-11 2-wire / TN12 or 600 ohm
  • Data port
  • RS232 serial interface
  • RS232 serial interface power
  • 2 Pin screw type

LED/Display
Power   Green
Signal   3 Colour
Call   Yellow
Voicemail   Green

Physical Specifications
    Unit only   Packed
Dimensions – mm   225 x 271 x 45   400 x 325 x 90
Dimensions – in.   8.8 x 10.6 x 1.2   15.7 x 12.8 x 3.5
Weight – kg   2.25   3.25
Weight – lb   4.9   7.1

Certifications
  • IEC60945
  • Germanischer Lloyd
  • American Bureau of Shipping
  • Electrical safety
  • EMC compliance
  • C tick
  • CE compliance

Kit Contents
  • RST100 Main terminal
  • Mounting brackets
  • AC 110/240V plug pack
  • DC 1.5m power cable
  • Data cable
  • User and installation manual
  • CD – Beam management system, AT commands, manuals

Resources


Partner Accessories

6 results

AeroAntenna AT1621-73 Fixed Mast Antenna

AeroAntenna AT1621-15 Mobile Permanent Mount Antenna

AeroAntenna AT1621-5 Mobile Permanent Mount Antenna

AeroAntenna AT1621-142 Fixed Mast Antenna

AeroAntenna AT1621-162 Single Channel Aviation Patch

AeroAntenna AT1621-162 Single Channel Aviation Patch

AeroAntenna AT1621-12 Mobile Magnetic Mount Antenna

Legal Disclaimer
NOTE: Iridium provides links to third-party websites as a convenience to you. The publishers of these websites are not related to Iridium and Iridium does not certify or endorse third-party applications, products, services, materials or websites of these third-parties including without limitation their content, functionality, quality, effectiveness, non-infringement, non-interference, reliability, performance or safety. Iridium is not responsible for examining or evaluating the content or accuracy of those websites, and that Iridium does not warrant and assumes no liability or responsibility for any third-party applications, products, services, materials or websites of third-parties.

CancelAgree